更新：1、优化配置构建脚本；

Signed-off-by: waiwaylee <waiwaylee@foxmail.com>
2026-10-20 13:40:39 +08:00
parent 2273841aa5
commit 3dee734d89
15 changed files with 488 additions and 271 deletions
@@ -0,0 +1,72 @@
+@echo off
+rem ===========================================================================
+rem Derive the build directory of one build configuration.
+rem
+rem Internal helper, called by configure.bat / build.bat / clean.bat /
+rem build_all.bat as:
+rem   call config_paths.bat ^<PHASE_SCANNING^|MECHANICAL_SCANNING^> ^<Debug^|Release^> [AUTO^|ON^|OFF]
+rem
+rem Accepted aliases: X256_PS = PHASE_SCANNING, X256_MS = MECHANICAL_SCANNING.
+rem
+rem On success the following variables are exported into the caller scope:
+rem   SCAN_MODE    PHASE_SCANNING / MECHANICAL_SCANNING
+rem   SCAN_TAG     X256_PS / X256_MS
+rem   BUILD_TYPE   Debug / Release
+rem   RECORD_MODE  AUTO / ON / OFF
+rem   REC_TAG      REC_AUTO / REC_OFF / REC_ON
+rem   BUILD_DIR    build\<SCAN_TAG>\<BUILD_TYPE>\<REC_TAG>
+rem
+rem Exit code: 0 = ok, 1 = invalid configuration.
+rem
+rem Encoding: keep this file ASCII-only (see msvc_env.bat).
+rem ===========================================================================
+set "SCAN_MODE="
+set "SCAN_TAG="
+set "BUILD_TYPE="
+set "RECORD_MODE="
+set "REC_TAG="
+set "BUILD_DIR="
+
+if "%~1"=="" goto :usage
+if "%~2"=="" goto :usage
+
+if /i "%~1"=="PHASE_SCANNING"      set "SCAN_MODE=PHASE_SCANNING"
+if /i "%~1"=="X256_PS"             set "SCAN_MODE=PHASE_SCANNING"
+if /i "%~1"=="MECHANICAL_SCANNING" set "SCAN_MODE=MECHANICAL_SCANNING"
+if /i "%~1"=="X256_MS"             set "SCAN_MODE=MECHANICAL_SCANNING"
+if not defined SCAN_MODE (
+    echo [ERROR] invalid scan mode: "%~1"
+    echo         expected PHASE_SCANNING / X256_PS or MECHANICAL_SCANNING / X256_MS
+    exit /b 1
+)
+if "%SCAN_MODE%"=="PHASE_SCANNING"      set "SCAN_TAG=X256_PS"
+if "%SCAN_MODE%"=="MECHANICAL_SCANNING" set "SCAN_TAG=X256_MS"
+
+if /i "%~2"=="Debug"   set "BUILD_TYPE=Debug"
+if /i "%~2"=="Release" set "BUILD_TYPE=Release"
+if not defined BUILD_TYPE (
+    echo [ERROR] invalid build type: "%~2"
+    echo         expected Debug or Release
+    exit /b 1
+)
+
+if not "%~3"=="" set "RECORD_MODE=%~3"
+if not defined RECORD_MODE set "RECORD_MODE=AUTO"
+if /i "%RECORD_MODE%"=="AUTO" set "RECORD_MODE=AUTO"
+if /i "%RECORD_MODE%"=="ON"   set "RECORD_MODE=ON"
+if /i "%RECORD_MODE%"=="OFF"  set "RECORD_MODE=OFF"
+if "%RECORD_MODE%"=="AUTO" set "REC_TAG=REC_AUTO"
+if "%RECORD_MODE%"=="ON"   set "REC_TAG=REC_ON"
+if "%RECORD_MODE%"=="OFF"  set "REC_TAG=REC_OFF"
+if not defined REC_TAG (
+    echo [ERROR] invalid record mode: "%~3"
+    echo         expected AUTO or ON or OFF
+    exit /b 1
+)
+
+set "BUILD_DIR=build\%SCAN_TAG%\%BUILD_TYPE%\%REC_TAG%"
+exit /b 0
+
+:usage
+echo Usage: config_paths.bat ^<PHASE_SCANNING^|MECHANICAL_SCANNING^> ^<Debug^|Release^> [AUTO^|ON^|OFF^]
+exit /b 1